canberra low pent
CANBERRA LOW PENT
It is essential that the buildings are anchored to a suitable concrete or slab base. Full details on preparing a base for these buildings will be sent prior to the unit being delivered. Nominal Model sizes are based on roof dimensions. Please refer to the table below for accurate roof and base measurements.
| TYPE | ROOF FRONT x SIDES |
AT BASE FRONT x SIDES |
HEIGHT APEX = RIDGE, PENT = FRONT LEAN-TO = PEAK |
NO OF CARTONS (kg) |
| 6 x 4 (LOW) | 184 x 123 cm | 171 x 113 cm | PENT 142 cm | 1 (A = 37 kg) |
| SPECIFICATIONS OF STEEL USED IN THE ' CANBERRA ' SHED RANGE | ||
| Pre Painted Galvanised Steel Sheet - Utilised for the wall, roof and doors of the storage unit | ||
| Thickness | 0.30mm | Base Metal Thickness (bmt) |
| Tensile | G550 | High Tensile |
| Coating | Z18 | 180 grams of Zinc Coating per m 2 |
| Paint Top Primer | 5 mic. | Epoxy Primer |
| Paint Top Coat | 18-20 mic. | Regular Modified Polyester |
| Paint Back Primer | 5 mic. | Epoxy Primer |
| Paint Back Top Coat | 10 mic. | Epoxy Light Grey |
| Galvanised Steel Sheet - Utilised for the frame of the storage unit | ||
| Thickness | 0.55 - 0.7 mm | Base Metal Thickness (bmt) |
| Tensile | G300 | Mild Steel |
| Coating | Z275 | 275 grams of Zinc Coating per m 2 |
Cart
No products
Shipping
£0.00
Total
£0.00
Top sellers
- Skylight
- Skylight for the Canberra range
- Canberra Six
- Great for the garden tools and the kids bikes
- canberra ten
- CANBERRA TEN
- canberra lean- to
- CANBERRA LEAN TO 4 x 6
- Window kit for Canberra
- Window kit for Canberra
Specials
No specials at this time