Metal Shed Company - canberra eight

Information

Viewed products

Timber floor...

Timber floor kit
Murryhill VT Garage...

The Murryhill VT Garage Building
Rear mounted...

Single rear shelf, Canberra Six
storemax

Hot-Dipped Galvanised steel body with ...

canberra eight

Print
View full size

CANBERRA EIGHT

More details

In the same category

More info
Accessories

HOT- DIPPED GALVANISED STEEL CONSTRUCTION THROUGHOUT

12 YEAR 'NO RUST PERFORATION' GUARANTEE

EXTRA HIGH WALLS - 178 cm EAVES HEIGHT

VENTILATED GABLES AS STANDARD TO ALL MODELS

NO CRACKS OR WARPS

ROT AND RODENT PROOF STORAGE

STRAIGHTFORWARD ASSEMBLY WITH FULL INSTRUCTIONS

STRONG EXIT / ENTRY RAMP ACROSS THE FULL DOOR OPENING WIDTH

A GOOD RANGE OF OPTIONAL ACCESSORIES AVAILABLE

DEDICATED HOME DELIVERY SERVICE

It is essential that the buildings are anchored to a suitable concrete or slab base. Full details on preparing a base for these buildings will be sent prior to the unit being delivered. Nominal Model sizes are based on roof dimensions. Please refer to the table below for accurate roof and base measurements.

TYPE	ROOF FRONT x SIDES	AT BASE FRONT x SIDES	HEIGHT APEX = RIDGE, PENT = FRONT LEAN-TO = PEAK	NO OF CARTONS (kg)
8 x 5	245 x 154 cm	233 x 144 cm	APEX 198 cm	1 (A = 64 kg)
8 x 6	245 x 185 cm	233 x 175 cm	- " -	1 (A = 71 kg)
8 x 7	245 x 216 cm	233 x 206 cm	- " -	1 (A = 78 kg)
8 x 9	245 x 278 cm	233 x 268 cm	- " -	1 (A = 94 kg)

SPECIFICATIONS OF STEEL USED IN THE ' CANBERRA ' SHED RANGE
Pre Painted Galvanised Steel Sheet - Utilised for the wall, roof and doors of the storage unit

Thickness	0.30mm	Base Metal Thickness (bmt)
Tensile	G550	High Tensile
Coating	Z18	180 grams of Zinc Coating per m 2
Paint Top Primer	5 mic.	Epoxy Primer
Paint Top Coat	18-20 mic.	Regular Modified Polyester
Paint Back Primer	5 mic.	Epoxy Primer
Paint Back Top Coat	10 mic.	Epoxy Light Grey

Galvanised Steel Sheet - Utilised for the frame of the storage unit

Thickness	0.55 - 0.7 mm	Base Metal Thickness (bmt)
Tensile	G300	Mild Steel
Coating	Z275	275 grams of Zinc Coating per m 2