canberra garage
Canberra garage
HOT- DIPPED GALVANISED STEEL CONSTRUCTION THROUGHOUT
12 YEAR 'NO RUST PERFORATION' GUARANTEE
EXTRA HIGH WALLS - 200 cm EAVES HEIGHT
VENTILATED GABLES AS STANDARD TO ALL MODELS
NO CRACKS OR WARPS
ROT AND RODENT PROOF STORAGE
STRAIGHTFORWARD ASSEMBLY WITH FULL INSTRUCTIONS
WIDE DOUBLE HINGED FRONT DOORS AS STANDARD
(NOTE: no side access door is included in this offer)
A GOOD RANGE OF OPTIONAL ACCESSORIES AVAILABLE
DEDICATED HOME DELIVERY SERVICE, WITH PRE-BOOKED DELIVERIES CARRIED
OUT BY OUR OWN VEHICLES AND STAFF
It is essential that the buildings are anchored to a suitable concrete or slab base. Full details on preparing a base for these buildings will be sent prior to the unit being delivered. Nominal Model sizes are based on roof dimensions. Please refer to the table below for accurate roof and base measurements.
| TYPE | ROOF FRONT x SIDES |
AT BASE FRONT x SIDES |
HEIGHT APEX = EAVES / RIDGE |
| 10 x 19 | 307 x 588 cm | 295 x 578 cm | 200 x 225 |
| SPECIFICATIONS OF STEEL USED IN THE TRECO RANGE | ||
| Pre Painted Galvanised Steel Sheet - Utilised for the wall, roof and doors of the storage unit | ||
| Thickness | 0.30mm | Base Metal Thickness (bmt) |
| Tensile | G550 | High Tensile |
| Coating | Z18 | 180 grams of Zinc Coating per m 2 |
| Paint Top Primer | 5 mic. | Epoxy Primer |
| Paint Top Coat | 18-20 mic. | Regular Modified Polyester |
| Paint Back Primer | 5 mic. | Epoxy Primer |
| Paint Back Top Coat | 10 mic. | Epoxy Light Grey |
| Galvanised Steel Sheet - Utilised for the frame of the storage unit | ||
| Thickness | 0.55 - 0.7 mm | Base Metal Thickness (bmt) |
| Tensile | G300 | Mild Steel |
| Coating | Z275 | 275 grams of Zinc Coating per m 2 |
No products
Shipping
£0.00
Total
£0.00
No specials at this time